Download the 100% tested and working CMF Phone 2 Pro unbrick flash file/stock ROM. to unbrick your smartphone or restore it to factory condition. This tested and verified stock ROM helps fix common software problems such as boot loops, stuck logos, and system errors. If your CMF Phone 2 Pro is not turning on or is stuck after a failed update, flashing the official firmware can easily bring it back to life.
The CMF Phone 2 Pro firmware also helps remove FRP lock, Google account lock, and forgotten pattern or PIN passwords. By installing this official ROM, you can reset your phone to its original performance, fix lag issues, and update the software manually using tools like SP Flash Tool.
Features of the CMF Phone 2 Pro Stock ROM:
-
Official and clean firmware
-
Tested and verified for all variants
-
Solves boot loop, hanging, and app crash issues
-
Supports FRP bypass and pattern unlock
-
Restores your phone’s warranty and performance
Important: Always back up your data before flashing. Use a fully charged device and follow the flashing steps carefully to avoid errors.
🔽 Download CMF Phone 2 Pro 24121 Flash File / Firmware
File Name: 24121_release_user_20250507_113944
Chipset: MediaTek Dimensity 7300 Pro (4 nm)
OS Version: Nothing OS 3.2 (Android 15)
Download Link:CMF Phone 2 Pro 24121 Flash File / Firmware
Password / Paid Flash Support: WhatsApp +91 9131162822
📲 About CMF Phone 2 Pro (Model 24121)
The CMF Phone 2 Pro is powered by the MediaTek Dimensity 7300 Pro chipset built on 4nm technology, paired with 8GB of RAM and 128GB/256GB internal storage. It runs Nothing OS 3.2 (Android 15) and includes a 5000 mAh non-removable battery with 33 W fast charging support.
Please note: this device does not have a dedicated SD card slot.
⚙️ Pre-Requisites Before Flashing
Before flashing your CMF Phone 2 Pro, make sure to follow these steps:
-
Charge your phone to at least 70%.
-
Use the original Nothing USB cable.
-
Install Nothing Flash Tool on your PC.
-
Install proper USB drivers (MediaTek or Nothing drivers).
-
Back up your data completely.
-
Make sure you have basic flashing knowledge.
⭐ Advantages of Flashing Stock ROM
-
Unbrick CMF Phone 2 Pro easily.
-
Fix boot loop or hang on logo issues.
-
Upgrade or downgrade firmware versions.
-
Remove FRP lock, Google lock, or pattern lock.
-
Fix lag, bugs, or software glitches.
-
Unroot and restore factory condition.
-
Regain device warranty by returning to stock firmware.
⚠️ Note: Flash your device at your own risk. We are not responsible for any damage or brick caused by incorrect flashing. Please follow instructions carefully.
🧰 How to Flash CMF Phone 2 Pro 24121 Using Nothing Flash Tool
-
Download and extract the CMF Phone 2 Pro Unbrick Flash File firmware on your PC.
-
Open the Nothing Flash Tool folder and double-click to launch it.
-
Once the tool opens, click “Start All”.
-
Power off your phone completely.
-
Connect your phone to the PC in EDL mode (Emergency Download Mode).
-
The tool will begin flashing automatically.
-
Wait until you see the success message — your device is now flashed successfully!
💡 Tip: If your device is not connecting to the PC, download and install the proper USB drivers before retrying.
💬 Need Help?
If you face any problem with the file, flashing process, or password, feel free to contact:
📞 WhatsApp: +91 9131162822
- Download cmf phone 2 pro flash file and tool
- unzip firmware file and tool
- run flash tool then go to partition option and check frp partition
- then click ok and start then connect device pressing vol+-
- now flashing start…………
- Thanks
